Portable edgebanders - MANUAL XL
 |
Hand held portable edgebander MANUAL XL is basic model designed for edgebanding of shaped and straight workpieces. more info
The working temperature is 160 °C and feeding speed 3,5 m/min. The machine is suitable for edgebanding of tapes from 0,8 up to 3 mm. The machine is often used instead of stacionary contour edge banders. The advantage is the posibility to use the machine on side. In small workshop can be the machine used as master edge bander. Portable edge banding machine MANUAL is equipped with hot melt gluing unit and automatic feeding. The machine is designed for edge banding of shaped and streight workpieces. Possibility of use - as hand held portable machine Portability of MANUAL allows comfortable edge banding at the workshop as well as at customer´s place. The machine is almost weightless during operation due to the design of guiding plate. Possibility of use - as fixed machineM Concerned the small workpieces the MANUAL can be changed into a table machine with very little effort |
| Parametrs | Unit | Value |
|---|---|---|
| Type | - | MANUAL XL |
| Feeding speed | m/min | 3,5 |
| Tape thickness | mm | ABS, PVC 0,8 – 3, Veneer 0,4 – 2 mm |
| Workpiece thickness | mm | 12 – 45 |
| Working temperature | °C | 160 |
| Glue pot capacity | g | newly 450 |
| Voltage | V / Hz | 230 / 50-60 |
| Power | W | 715 |
| Weight | kg | 7 |
| Height x Width x Length | mm | 380x250x320 |
inquiry form
Why to buy?
Video
Wrote about us
