www.adamikcompany.com

At the end of October 2018, we received an inquiry from the company Emil Obořil for the dust extraction system for Homag BHX CNC and edgebanding machines with pre-milling HOMAG.

Firstly we took the measurements of the workshop and then we chose the dust collector FT 616 A as the most appropriate unit.

So we sent an offer to Mr. Obořil  for this dust collector, piping system with connection to the machines included.

Mr. Obořil was so interested by this offer he received that he decided to order this extraction system for his second workshop, where it is necessary to exhaust the HOMAG cutting center and SCM format saw.

We agreed that the FT 616 A dust collector unit is the most suitable for the second workshop, and we also designed a suitable piping system as well.

At the cutting center we have installed the cleaning system with a vacuum suction pipe that eases the procedure of cleaning the workshop.

Due to the lack of space, Mr. Obořil had a requirement to hang the fan under the ceiling.

As you can see on the photos, we have also solved this problem.

The realization was carried out in mid-December 2018.

We would like to thank Mr. Obořil for his trust.

 

© 2019 ADAMIK COMPANY | design by www.creactive.cz | code by PCsupport.cz s.r.o.